Welcome to Hangzhou Shida Machinery Co., Ltd!

  • Product Name: What is Maintenance of Pipe Threading Machine
  • Products No: Maintenance
  • Views : 21

CONTACT US

Maintenance of Pipe Threading Machine

 

● Turn the master switch to the position of “OFF”, or unplug the power when machine is checked and maintained.

● Shell of our Pipe Threading Machine is cast with a whole piece of aluminum alloy, its reduction gearbox keeps lubricating permanently. Donot impact the shell violently.

● Cooling oil system: clean the oil filter disk and oil suction filter disk after running for 8-12 hours. Clean the oil tank and refill it if the oil inside is dirty or turns black.

● Small iron filings may fall into the oil tank when threading, it is therefore essential to clean the filter disk once a week to keep the machine in order.

● Check the cutter wheel each once a week, replace it when it is blunt.  

● Check the attrition of the Chuck Jaw Inserts once a month. If the Chuck Jaw Inserts are worn, replace them(three each set) to ensure to produce threads of high quality.

● Clean Die Head and Die every shift. Check if the teeth of Die are broken, if they are, remove the cuttings between teeth; if the Die has already been broken, replace a set of Die instead of the broken one.

● There are two oil cups on the shell of main shaft, oil at least twice each shift to be lubricated the fore and rear bearing.

● Unplug the power when the machine is not in use, coat corrosion resistant oil on both fore and rear guideposts and other working surface. Store it in dry ventilated place.

Related products
  • 1
     

  • 2
     

  • 3
     

  • 4
     

  • 5